ACL Configuration

For configuring an access control list, you define filter criteria (with match conditions) for the packets and an action for the device to take if the packets match the filtering criteria.

Configuration Hierarchy

The diagram illustrates the ACL configuration hierarchy.

ACL Configuration Hierarchy

Configuration Syntax and Commands

The following sections describe the ACL configuration syntax and commands.

Configuring ACLs

Syntax:

set forwarding-options acl [l2 | l3v4 | l3v6] rule <name> ordinal <number> <option> <attribute> <value>

Options Description

<name>

Name of the ACL rule.

<number>

Specifies the ordinal number.

match <…​>

Match configuration hierarchy. For details, see section Configuring ACL Match Criteria.

action <…​>

Action configuration hierarchy. For details, see section Configuring ACL Actions.

priority <priority>

Specifies the ACL priority value. The default entry priority for user-defined ACLs changes to 500. The configurable ACL entry priority range becomes 100 - 20000. A lower number indicates higher priority.

Configuring ACL Match Criteria

set forwarding-options acl [ l2 | l3v4 | l3v6 ] rule <rulename> ordinal <ordinal_value> match <attribute> <value>

Attribute Description

destination-mac <destination-mac>

ACL L2 destination mac match.

destination-ipv4-prefix <destination-ipv4-prefix>

ACL L3 IPv4 destination prefix match.

destination-ipv4-prefix-list <destination-ipv4-prefix-list>

ACL destination IPv4 prefix-list name. You can apply a prefix list that is previously configured. Refer to section Configuring Prefix Lists.

destination-l4-port <destination-l4-port>

ACL L4 destination port match.

destination-ipv4-local true

Indicates whether match support is enabled for all traffic destined for the routers' IP addresses. Note: To disable the configuration, use the delete form of the command.

destination-ipv6-prefix <destination-ipv6-prefix>

ACL L3 IPv6 destination prefix match.

destination-ipv6-prefix-list <destination-ipv6-prefix-list>

ACL destination IPv6 prefix-list name. You can apply a prefix list that is previously configured. Refer to section Configuring Prefix Lists.

destination-ipv6-local true

Indicates whether match support is enabled for all traffic destined for the routers' IP addresses. To disable the configuration, use the delete form of the command.

direction ingress

ACL L2/L3 direction match. Currently, only the ingress direction is supported.

ethertype <ethertype>

ACL L2 EtherType match.

inner-tag-protocol-id <inner-tag-protocol-id>

ACL L2 inner TPID match.

inner-vlan <inner-vlan>

ACL L2 inner-VLAN match.

inner-vlan-cfi <inner-vlan-cfi>

ACL L2 inner-VLAN CFI match.

inner-vlan-priority <inner-vlan-priority>

ACL L2 inner-VLAN priority match.

interface <interface>

Interface match.

ip-options true

Match if the IPv4 packet has options. Supported value: true.

ip-protocol <protocol>

ACL IP protocol value match such as TCP, UDP, ICMP.

ipv4-dscp <ipv4-dscp>

IPv4 DSCP value.

ipv4-tos <ipv4-tos>

IPv4 ToS value.

ipv6-tc <ipv6-tc>

Codepoint class value.

logical-interface <logical-interface>

Logical interface match.

source-ipv4-prefix <source-ipv4-prefix>

ACL L3 IPv4 source prefix match.

source-ipv4-prefix-list <source-ipv4-prefix-list>

ACL source IPv4 prefix-list name. You can apply a prefix list that is previously configured. Refer to section Configuring Prefix Lists.

source-ipv6-prefix <source-ipv6-prefix>

Configure ACL L3 IPv6 source prefix match.

source-ipv6-prefix-list <source-ipv6-prefix-list>

ACL source IPv6 prefix-list name. You can apply a prefix list that is previously configured. Refer to section Configuring Prefix Lists.

source-l4-port <source-l4-port>

ACL L4 source port match.

outer-tag-protocol-id <outer-tag-protocol-id>

ACL L2 outer TPID match.

outer-vlan <outer-vlan>

ACL L2 outer-VLAN match.

outer-vlan-cfi <outer-vlan-cfi>

ACL L2 outer VLAN CFI match.

outer-vlan-priority <outer-vlan-priority>

ACL L2 outer VLAN priority match.

source-mac <source-mac>

ACL L2 source MAC match.

traffic-class <class>

Forward class value. Supported values: class-0 to class-7, class-all.

ttl <ttl>

IPv4 time-to-live value.

match-mpls-traffic true

Match single MPLS label termination. To disable, use the delete form of the command.

Example 1: Layer 2 Match Configuration

{
    "rtbrick-config:acl": {
       "l2": {
          "rule": [
            {
              "rule-name": "a10nsp-drop-lag-2",
              "ordinal": [
                {
                  "ordinal-value": 1,
                  "match": {
                    "direction": "ingress",
                    "interface": "lag-2",
                    "outer-vlan-priority": 1
                  },
                  "action": {
                    "drop": "true",
                    "statistics": "true"
                  }
                },

Example 2: Layer 3 IPv4 Match Configuration

{
    "rtbrick-config:acl": {
      "l3v4": {
        "rule": [
          {
            "rule-name": "rtb_firewall_two",
            "ordinal": [
              {
                "ordinal-value": 1000,
                "match": {
                  "direction": "ingress",
                  "source-ipv4-prefix": "198.51.100.50/24",
                  "source-l4-port": 8080
                },
                "action": {
                  "drop": "true"
                }
              }
            ]
          },
          {
            "rule-name": "rule2",
            "ordinal": [
              {
                "ordinal-value": 5,
                "match": {
                  "direction": "ingress",
                  "interface": "ifp-0/0/1"
                }
              }
            ]
          }
        ]
      }
    }
  }

Example 3: Layer 3 IPv6 Match Configuration

{
    "rtbrick-config:l3v6": {
      "rule": [
        {
          "rule-name": "rtb_firewall_two",
          "ordinal": [
            {
              "ordinal-value": 1000,
              "match": {
                "direction": "ingress",
                "source-ipv6-prefix": "2001:db8:0:11::/32",
                "source-l4-port": 8080
              },
              "action": {
                "permit": "true"
              }
            }
          ]
        }
      ]
    }
  }

Example 4: Match support for all traffic destined for any of the router’s IP addresses

{
    "rtbrick-config:acl": {
      "l3v4": {
        "rule": [
          {
            "rule-name": "rule4",
            "ordinal": [
              {
                "ordinal-value": 4,
                "match": {
                  "direction": "ingress",
                  "destination-ipv4-local": "true"
                },
                "action": {
                  "drop": "true"
                }
              }
            ]
          }
        ]
      },
      "l3v6": {
        "rule": [
          {
            "rule-name": "rule2",
            "ordinal": [
              {
                "ordinal-value": 2,
                "match": {
                  "direction": "ingress",
                  "destination-ipv6-local": "true"
                },
                "action": {
                  "drop": "true"
                }
              }
            ]
          }
        ]
      }
    }
  }

Configuring ACL Actions

Syntax:

set forwarding-options acl [l3v4 | l3v6] rule <rulename> ordinal <ordinal_value> action <attribute> <value>

Attribute Description

drop true

If the ACL rule specifies drop true, the system will discard any packets that match that rule. Use the delete form of the command for the system to ignore the rule.

permit true

If the ACL rule specifies permit true, the system forwards traffic matching that rule. Use the delete form of the command for the system to ignore the rule.

action statistics true

Configure action, enable statistics. Use the delete form of the command to disable the configuration.

A limited number of counter resources are available in a common pool for user-defined ACLs, protocol ACLs, L3, and L2X logical interfaces.

forward-class <class>

Specifies forward class value (class-0 to class-7, class-all)

mirror <mirror>

Specifies ACL action mirror name.

Currently, ACLs with mirror actions are not supported.

capture true

You can enable the capture action when using the RBFS built-in capture feature with an ACL to more granularly specify the traffic to be captured. To disable, use the delete form of the command. For more information and an example, refer to the RBFS NOC Troubleshooting Guide.

policer-name <policer-name>

Specifies policer profile name.

redirect-to-cpu true

Configure action, redirect packets to CPU. To disable, use the delete form of the command.
Example
{
            "rule-name": "rtb_firewall_two",
            "ordinal": [
              {
                "ordinal-value": 1000,
                "match": {
                  "direction": "ingress",
                  "source-ipv4-prefix": "198.51.100.50/24",
                  "source-l4-port": 8080
                },
                "action": {
                  "drop": "true"
                }
              }
            ]
          }

Configuring Prefix Lists

Configuring IPv4/IPv6 Prefix List for ACL and Multifield Classifier

Syntax:

set forwarding-options prefix-list <prefix-list-name> <attribute> <value>

Attribute Description

<prefix-list-name>

Name of the prefix list, which will be later used to attach with ACL configuration.

ipv4-prefix <ipv4_prefix>

Specifies the IPv4 prefix address.

ipv6-prefix <ipv6_prefix>

Specifies the IPv6 prefix address.
Example 1: Prefix List Configuration
supervisor@rtbrick>LEAF01: op> show config forwarding-options prefix-list
{
    "rtbrick-config:prefix-list": [
      {
        "prefix-list-name": "ipv4-list",
        "ipv4-prefix": [
          {
            "ipv4-prefix": "198.51.100.50/24"
          },
          {
            "ipv4-prefix": "198.51.101.60/24"
          },
          {
            "ipv4-prefix": "198.51.102.70/24"
          }
        ]
      }
    ]
  }
Example 2: Using Prefix-list in Multifield-Classifier
supervisor@rtbrick>LEAF01: op> show config forwarding-options prefix-list pta-iptv-multicast
{
  "rtbrick-config:prefix-list": [
    {
      "prefix-list-name": "ipv4-list",
      "ipv4-prefix": [
          {
            "ipv4-prefix": "198.51.100.50/24"
          },
          {
            "ipv4-prefix": "198.51.101.60/24"
          },
          {
            "ipv4-prefix": "198.51.102.70/24"
          }
      ]
    }
  ]
}
Example 3: Viewing Multifield-Classifier Details
supervisor@rtbrick>LEAF01: op> show config forwarding-options class-of-service multifield-classifier acl l3v4 rule pta-triple-play-8queues ordinal 6000
{
  "rtbrick-config:ordinal": [
    {
      "ordinal-value": 6000,
      "match": {
        "destination-ipv4-prefix-list": "ipv4-list"
      },
      "action": {
        "forward-class": "class-1",
        "remark-codepoint": 248
      }
    }
  ]
}