Resource Limits/Feature Support
Limiting the resource usage or consumption (wherever applicable) helps to improve the system stability and also restricts over utilization of system capacity. In RBFS, the usage limits for the following resources are pre-defined:
-
IPv4 Route Count
-
IPv6 Route Count
-
NAT44 Rule Count
-
MTU Profile
-
L3 MTU-Profile
-
Subscriber MTU Profile
-
Physical MTU Profile
In addition, you can track the resource usage of the following features.
-
6PE label
-
High Precision QoS
You can specify resource limits on the following images (also known as roles).
Access-Leaf Image
The following table provides the limits defined for the resources for the access-leaf images that RBFS supports.
Component | Feature/Resource | UfiSpace S9600-102XC (Q2C) |
UfiSpace S9600-72XC (Q2C) |
EdgeCore AGR420 (AS7946-74XKSB) (Q2C) |
---|---|---|---|---|
FIB |
IPv4 Route Count |
1,200,000 |
1,200,000 |
1,200,000 |
IPv6 Route Count |
250,000 |
250,000 |
250,000 |
|
Low Rate Shaping Enabled (<1000 Kbps) |
Yes |
Yes |
Yes |
|
CONFD |
MTU-Profile Count |
8 |
8 |
8 |
L3 MTU-Profile Count |
3 |
3 |
3 |
|
Subscriber MTU-Profile Count |
6 |
6 |
6 |
|
Physical MTU Profile Count |
8 |
8 |
8 |
|
BGP |
6PE label value |
2 |
2 |
2 |
BGP FlowSpec ACL |
1,000 |
1,000 |
1,000 |
Multiservice Edge Image
The following table provides the limits defined for the resources for the Multiservice Edge images that RBFS supports.
Component | Feature | UfiSpace S9600-102XC (Q2C) |
UfiSpace S9600-72XC (Q2C) |
Edgecore AGR420 (AS7946-74XKSB) (Q2C) |
UfiSpace S9510-28DC (Q2A) |
EdgeCore CSR440 (AS7535-28XB) (Q2A) |
---|---|---|---|---|---|---|
FIB |
IPv4 Route Count |
1,200,000 |
1,200,000 |
1,200,000 |
1,200,000 |
1,200,000 |
IPv6 Route Count |
250,000 |
250,000 |
250,000 |
500,000 |
500,000 |
|
NAT44 Rule Count |
3,810,000 |
3,810,000 |
3,810,000 |
150,000 |
150,000 |
|
Low Rate Shaping Enabled (<1,000 Kbps) |
Yes |
Yes |
Yes |
Yes |
Yes |
|
CONFD |
MTU-Profile Count |
8 |
8 |
8 |
8 |
8 |
L3 MTU-Profile Count |
3 |
3 |
3 |
3 |
3 |
|
Subscriber MTU-Profile Count |
6 |
6 |
6 |
5 |
5 |
|
Physical MTU Profile Count |
8 |
8 |
8 |
8 |
8 |
|
BGP |
6PE label value |
2 |
2 |
2 |
2 |
2 |
BGP FlowSpec ACL |
1,000 |
1,000 |
1,000 |
1,000 |
1,000 |
Spine Image
The following table provides the limits defined for the resources for the spine images that RBFS supports.
Component | Feature | UfiSpace S9600-32X (Q2C) |
EdgeCore AGR400 (AS7946-30XB) (Q2C) |
---|---|---|---|
FIB |
IPv4 Route Count |
1,200,000 |
1,200,000 |
IPv6 Route Count |
250,000 |
250,000 |
|
Low Rate Shaping Enabled |
No |
No |
|
CONFD |
MTU-Profile Count |
8 |
8 |
L3 MTU-Profile Count |
3 |
3 |
|
Subscriber MTU-Profile Count |
6 |
6 |
|
Physical MTU Profile Count |
8 |
8 |
|
BGP |
6PE label value |
2 |
2 |
BGP FlowSpec ACL |
1,000 |
1,000 |
L2 Wholesale (L2BSA) Image
The following table provides the limits defined for the resources for the L2BSA images that RBFS supports.
Component | Feature | UfiSpace S9500-22XST (QAX) |
Edgecore CSR320 (AS7316-26XB) (QAX) |
---|---|---|---|
FIB |
IPv4 Route Count |
— |
— |
IPv6 Route Count |
— |
— |
|
CONFD |
MTU-Profile Count |
8 |
8 |
L3 MTU-Profile Count |
3 |
3 |
|
Subscriber MTU-Profile Count |
5 |
5 |
|
Physical MTU Profile Count |
8 |
8 |
|
BGP |
6PE label value |
— |
— |
BGP FlowSpec ACL |
— |
— |
Show CLI for Displaying ACL Table Information
The show acl table
command displays the access control list table information. The options for the show acl table
command varies depending on the platforms and their roles.
Syntax:
show acl table <options>
The following are the ACL table types supported across different platforms and their respective roles:
Supported CLI options on the Q2A Multiservice Edge platform:
Option | Description |
---|---|
l2 |
Displays the information for Layer 2 ACL table. |
li |
Displays the information for Lawful Interception (LI) ACL table. |
l3v4 |
Displays the information for IPv4 Layer 3 ACL table. |
l3v6 |
Displays the information for IPv46 Layer 3 ACL table. |
policer |
Displays information related to traffic policers configured in the system. |
Supported CLI Option on the Q2C Multiservice Edge Platform:
Option | Description |
---|---|
l2 |
Displays the information for Layer 2 ACL table. |
li |
Displays the information for Lawful Interception (LI) ACL table. |
pmf_mf_de_act |
Displays the information for packet matching function with match fields for deactivation rules. |
pmf_l3_de_act |
Displays the information for packet matching function for Layer 3 deactivation rules. |
ext_l3v4_mf |
Displays the information for extended IPv4 Layer 3 ACL table. |
ext_l3v6_mf |
Displays the information for extended IPv6 Layer 3 ACL table. |
ext_l3v4 |
Displays the information for the extended IPv4 Layer 3 ACL table. |
ext_l3v6 |
Displays the information for extended IPv6 Layer 3 ACL table. |
l3v4 |
Displays the information for the extended IPv4 Layer 3 ACL table. |
ext_policer |
Displays the information for ACL table type for applying policers on matched traffic. |
policer_level |
Displays the information for the policer levels. |
pmf_policer_de_act |
Displays the information for packet matching function for policer deactivation rules. |
Example:
supervisor@rtbrick>rtbrick.net: cfg> show acl table
<cr>
ext_l3v4 ACL table type
ext_l3v4_mf ACL table type
ext_l3v6 ACL table type
ext_l3v6_mf ACL table type
ext_policer ACL table type
l2 ACL table type
l3v4 ACL table type
li ACL table type
pmf_l3_de_act ACL table type
pmf_mf_de_act ACL table type
pmf_policer_de_act ACL table type
policer_level ACL table type
Supported CLI options on the Q2C Spine (UfiSpace) Platforms:
Option | Description |
---|---|
l2 |
Displays the information for Layer 2 ACL table. |
l3v4 |
Displays the information for standard IPv4 Layer 3 ACL table. |
l3v6 |
Displays the information for standard IPv6 Layer 3 ACL table. |
policer |
Displays information related to traffic policers configured in the system. |
l2_cp |
Displays information about Layer 2 control protocol packets. |
sampling_egress |
Displays egress packet sampling configuration information. |
Supported CLI options on the Q2C Access Leaf (UfiSpace) Platforms:
Option | Description |
---|---|
l2 |
Displays the information for Layer 2 ACL table. |
li |
Displays the information for Lawful Interception (LI) ACL table. |
pmf_mf_de_act |
Displays the information for packet matching function with match fields for deactivation rules. |
pmf_l3_de_act |
Displays the information for packet matching function for Layer 3 deactivation rules. |
ext_l3v4_mf |
Displays the information for extended IPv4 Layer 3 ACL table. |
ext_l3v6_mf |
Displays the information for extended IPv6 Layer 3 ACL table. |
ext_l3v4 |
Displays the information for the extended IPv4 Layer 3 ACL table. |
ext_l3v6 |
Displays the information for extended IPv6 Layer 3 ACL table. |
l3v4 |
Displays the information for standard IPv4 Layer 3 ACL table. |
ext_policer |
Displays the information for ACL table type for applying policers on matched traffic. |
policer_level |
Displays the information for the policer levels. |
pmf_policer_de_act |
Displays the information for packet matching function for policer deactivation rules. |
Example:
supervisor@rtbrick.net: cfg> show acl table l3v4 direction ingress
Table name: L3V4_INGRESS
Profile id: default
Table stage: ipmf1
Table priority: 5
Handle: 40
Matches supported:
source_ipv4_prefix
destination_ipv4_prefix
ipv4_protocol
ipv4_tos
ip_has_options
ip_tunnel_type
source_l4_port
destination_l4_port
forward_class
in_vlan_port
tcp_ctrl_flags
Actions supported:
drop
trap_id
redirect_to_cpu
policer_and_counter
forward_class
remark_codepoint
fwd_type_ipv4
Contexts supported:
fwd_type_ipv4_ipmf1