Firmware Versions
To check the firmware versions for a specific platform, connect to the device, access the CLI prompt, and run the show firmware
command. Additionally, the show platform
command can be used to display the hardware platform information, which includes the diagnostic firmware (DIAG) version.
The table below shows the firmware versions that are embedded in the hardware platforms supported by RBFS Release 25.3.1 (current).
Platform | DIAG Version | Firmware Versions |
---|---|---|
S9600-102XC |
0.0.2 |
|
S9600-72XC |
0.1.4 |
|
S9600-32X |
0.1.8 |
|
AGR420 |
02.0b.00.01_OP2_ILKN_20220224 |
|
AGR400 |
02.0a.00.06 |
|
S9510-28DC |
DIAG_DNX_4.0.37 |
|
CSR440 |
02.02.00.07 |
|
S9500-22XST |
DIAG_DNX_4.0.21 |
|