Introduction
Port Mirroring is a method of monitoring network traffic. When you enable port mirroring, the switch sends a copy of all network packets seen on one port to another port, where the packet can be analyzed.
Inbound Mirroring
Inbound mirroring is defined per In-Port, or per In-Port x VLAN. Configurations for six distinct VLAN tags, for any other VLAN tag, and for packets without VLAN tags are supported. The ingress mirroring can be sampled by specifying a probability that a matching packet will be mirrored.
Outbound Mirroring
Outbound mirroring is defined per Out-Port, or per Out-Port x VLAN tag. Configurations for seven distinct VLAN tags are supported.
Guidelines and Limitations
-
Up to 15 mirror profiles can be configured.
-
The same mirror resources are used for Lawful Interception (LI) and Port Mirroring.
-
You can configure a CPU port as destination physical interface port; but if heavy traffic is mirrored, it may impact system performance.
-
If physical interface/logical interface goes down, mirror configuration will not be deleted automatically. You need to delete the mirror configuration explicitly.
-
Before creating logical interface mirroring, the source logical interface should exist.
-
The logical interface should not be deleted during mirroring.
-
If you want to mirror traffic to CPU, enable the control plane security features. For more refer, see the Control Plane Security Guide.
-
Since this is a debugging tool, the save and reload functionality is not supported.