RBFS Spine Image on Edgecore AGR400 (AS7946-30XB)
The RBFS Spine is a software image that supports aggregation functionality across the access leaves in a Spine Leaf deployment for BNG. This image is supported on Edgecore AGR400 (AS7946-30XB) platform.
Hardware Specification
Model |
EdgeCore AGR400 (AS7946-30XB) |
Form-factor |
2RU, 19 Inch, Rack-Mountable |
Switching Capacity |
2.4 Tbps |
Switch ASIC |
Broadcom Qumran-2C BCM88823 |
Co-Processor |
- |
CPU |
Intel Broadwell (8-Core) |
Role |
Spine |
System Memory |
SDRAM DDR4 SO-DIMM 32GB (16 GB x 2) |
Storage (SSD) |
128 GB |
Interfaces |
|
Max. Number of LAG Interfaces Supported Per LAG |
33 |
Number of LAG Members Supported Per LAG |
10 |
For more information, click the link below.
https://www.edge-core.com/solution-inquiry.php?cls=5&id=129
Port LED Definitions for 400G, 100G, 25G NIF Optical Transceivers on Edgecore AGR400 (AS7946-30XB)
The Edgecore AGR400 platform uses port LEDs to indicate link status, operational speed, and SerDes mode. The LED color reflects the active port configuration and is turned off when the link is down or any required SerDes lane is not operational.
The following table provides the LED status definitions for 400G, 100G, 25G NIF NIF ports associated with optical transceivers on the Edgecore AGR400 (AS7946-30XB) Spine device.
| Port Type | Number of Lanes / SerDes Rate (Gb/s) | SerDes Mode | LED1 (Speed/Link) Signaling | LED2 (Activity) Signaling |
|---|---|---|---|---|
400G QSFP-DD |
8 / 53.125 |
PAM4 |
Solid Magenta (R+B). Off if one lane is not linked. |
Solid Magenta (R+B), blink if activity. Off if one lane is not linked. |
100G QSFP-DD |
4 / 25.78125 |
NRZ |
Solid Blue (B). Off if one lane is not linked. |
Solid Blue (B), blink if activity. Off if one lane is not linked. |
100G QSFP-DD |
4 / 10.3125 |
NRZ |
Solid Green (G). Off if one lane is not linked. |
Solid Green (G), blink if activity. Off if one lane is not linked. |
100G QSFP-28 |
4 / 25.78125 |
NRZ |
Solid Blue (B). Off if one lane is not linked. |
Solid Blue (B), blink if activity. Off if one lane is not linked. |
100G QSFP28 |
4 / 10.3125 |
NRZ |
Solid Green (G). Off if one lane is not linked. |
Solid Green (G), blink if activity. Off if one lane is not linked. |
25G SFP28 |
1 / 25.78125 |
NRZ |
Solid Blue (B), blink if activity. Off if the lane is not linked. |
Just have LED1 |
25G SFP28 |
1 / 10.3125 |
NRZ |
Solid Green (G), blink if activity. Off if the lane is not linked. |
Just have LED1 |
25G SFP28 |
1 / 1.25 |
NRZ |
Solid Yellow (R+G), blink if activity. Off if the lane is not linked. |
Just have LED1 |
Port LED Definitions for 400G/100G/25G Breakout Interfaces on Edgecore AGR400 (AS7946-30XB)
The following table provides the LED status definitions for 400G, 100G, 25G NIF breakout interfaces associated with optical transceivers on the Edgecore AGR400 (AS7946-30XB) Spine device.
| Port Type | Number of Breakout / SerDes Rate (Gb/s) | SerDes Mode | LED1 (Speed/Link) Signaling | LED2 (Activity) Signaling |
|---|---|---|---|---|
400G QSFP-DD |
4 / 53.125 (4 × 100G) |
PAM4 |
Solid Blue (B) if any lane is linked. Off if no lane is linked. |
Solid Blue (B), blink if any lane is activity. Off if no lane is linked. |
400G QSFP-DD |
8 / 53.125 (8 × 50G) |
PAM4 |
Solid Red ® if any lane is linked. Off if no lane is linked. |
Solid Red ®, blink if any lane is activity. Off if no lane is linked. |
400G QSFP-DD |
8 / 25.78125 (8 × 25G) |
NRZ |
Solid Cyan (G+B) if any lane is linked. Off if no lane is linked. |
Solid Cyan (G+B), blink if any lane is activity. Off if no lane is linked. |
400G QSFP-DD (downgrade to 100G QSFP-DD) |
2 / 25.78125 (2 × 50G) |
NRZ |
Solid Red ® if any lane is linked. Off if no lane is linked. |
Solid Magenta Red ®, blink if any lane is activity. Off if no lane is linked. |
400G QSFP-DD (downgrade to 100G QSFP-DD) |
4 / 25.78125 (4 × 25G) |
NRZ |
Solid Cyan (G+B) if any lane is linked. Off if no lane is linked. |
Solid Cyan (G+B), blink if any lane is activity. Off if no lane is linked. |