Firmware Versions
To check the firmware versions for a specific platform, connect to the device, access the CLI prompt, and run the show firmware
command. Additionally, the show platform
command can be used to display the hardware platform information, which includes the diagnostic firmware (DIAG) version.
Example: Displaying firmware versions for the S9600-102XC platform:
supervisor@rtbrick>switch: op> show firmware x86_64-ufispace_s9600_102xc-r0 CPU CPLD: 1.17.5 Mainboard CPLD1: 0.0.9 Mainboard CPLD2: 0.0.1 Mainboard CPLD3: 0.0.1 Mainboard CPLD4: 0.0.1 Mainboard CPLD5: 0.0.1 BIOS: SKLD_BIOS_R04.10 BMC: 2.39.0 HW ID: 2 DEPH ID: 0 SKU ID: 28 ID type: 0 Build ID: 0 MU Version: v2.0.0
The table below shows the firmware versions that are embedded in the hardware platforms supported by RBFS Release 25.2.1.1.
Platform | DIAG Version | Firmware Versions |
---|---|---|
S9600-102XC |
0.0.2 |
|
S9600-72XC |
0.1.4 |
|
S9600-32X |
0.1.8 |
|
AGR420 |
02.0b.00.01_OP2_ILKN_20220224 |
|
AGR400 |
02.0a.00.06 |
|
S9510-28DC |
DIAG_DNX_4.0.37 |
|
CSR440 |
02.02.00.07 |
|
S9500-22XST |
DIAG_DNX_4.0.21 |
|
CSR320 |
01.01.00.03 |
|