Download PDF
Home

1. RBMS Template Engine

The RBMS Template Engine is an execution engine for templates. A folder in the filesystem serves as template storage for the engine. The content of the folder follows a convention.

1.1. Template Folder structure

Template folder structure
templates
 |-- includes
 |   |-- <include-template>.gojson
 |-- <template name>
     |-- config.yaml
     |-- <include-template>.gojson
     |-- <main-template>.gojson

The template engine uses one templates folder where all the templates are stored. Each template resides in his own folder, the folder name is the template name. The config.yaml file inside a template folder indicates that this folder is a template. In this file also other configurations for the template engine can be made.

The template folder contains one main-template and can contain multiple `include-templates. The include-templates can be included into the main template.

Folders that don’t contain a config.yaml are not treated as templates. This folders can be used as containers for other include-template files.

1.2. Template config

This section describes the config.yaml file. Image this folder structure for the next examples.

Simple example folder structure
templates
|-- includes
|   |-- global_include.gojson
|-- sample
    |-- config.yaml
    |-- local_include.gojson
    |-- main.gojson

Here there is a main-template which includes the local_include-template and the global_include-template. The config.yaml is used by the template engine to parse the right files, so that the include-directives work.

templates/sample/config.yaml
engine: golang
main_template: "main.gojson"
main_pattern: "*.gojson"
include_pattern: "includes/*.gojson"
post_processors:
  - removeTrailingCommas
  - prettyJSON
Table 1. config.yaml attributes
Attribute Default Description

engine

golang

selects the template engine, at the moment only golang is supported

main_template

none

points to the entrypoint of the rendering process, this template is used as the top most, it hast to be included in the main pattern.

main_pattern

none

describes which files the engine should parse from the template folder.

include_pattern

none

describes which files the engine should additionally parse relative to the templates folder.

post_processors

none

allows to specify post processors that are used in that order on top of the generated output.

Table 2. Post processors
Attribute Description

removeTrailingCommas

removes in json files the commas which are not valid, this makes the template much easier

removeEmptyLines

removes empty lines

prettyJSON

Pretty converts the input json into a more human readable format where each element is on it’s own line with clear indentation

uglyJSON

Ugly removes insignificant space characters from the input json byte slice and returns the compacted result.

1.3. GO Lang Template Engine

The default engine is the golang template engine. This gives some links to more detailed information.

The GO Lange template engine is based on:

  • GoLang test template
    The golang text template engine. This allows evaluating arguments, execute actions and include other templates.

  • sprig functions
    Beside of the default functions golang already provides, the sprig function library is added to the engine.

1.4. Example

This section shows a simple example, that covers a lot of functionality of the templates.

The example uses the following folder structure. Each file will be described in more detail.

Full example folder structure
templates
|-- includes
|   |-- global_include.gojson
|-- sample
    |-- config.yaml
    |-- example_variables.json
    |-- local_include.gojson
    |-- main.gojson

The template is called sample, because there is a config.yaml in the folder sample.

templates/sample/config.yaml
engine: golang
main_template: "main.gojson"
main_pattern: "*.gojson"
include_pattern: "includes/*.gojson"
post_processors:
  - removeTrailingCommas
  - prettyJSON

The config.yaml file states that the main_template is called main.gojson, so thats the entrypoint for the generation.

The main_pattern defines this files templates/sample/*.gojson should be parsed into the template engine, so also the main_pattern is included.

The include_patterns defines this files templates/includes/*.gojson should be parsed into the template engine.

The post_processors are used to remove the trailing commas and make the JSON output more readable.

Let’s expect the following example variables structure.

templates/sample/example_variables.json
{
  "description": "sample",
  "interfaces": [
    {
      "name": "ifp_0/0/1",
      "ipv4": "127.0.0.1",
      "x": 5,
      "y": 3
    },    {
      "name": "ifp_0/0/2",
      "ipv4": "127.0.0.2",
      "x": 4,
      "y": 4
    }
  ]
}

The this variables can be used to fill a template.

templates/sample/main.gojson
{{define "t1"}}
    "hostname": "static",
{{end}}
{
    {{template "t1"}}
    "description": "{{.description}}",
    "interfaces": {
        {{template "local_include.gojson" .interfaces}}
    },
    "list": {{template "global_include.gojson" .}}
}

This templates starts with a definition of a new template t1 that will be used in this template.

This template t1 is included immediately after {.

Then the description is added, the selection from the variable is done via the .description.

For the interfaces we use the local template local_include.gojson, the variables that are forwarded to the template are the .interfaces so only the array of the original variable set.

To render the list we include the global_include.gojson template and forward the original variable set.

templates/sample/local_include.gojson
{{range .}}
"{{.name}}": {
    "ip": "{{.ipv4}}",
    "1000/x*y": {{div 10000 (mul .x .y) }},
},
{{end}}

The local_include.gojson iterates over the interfaces list and prints the name and ip-address of the interface.

Also a simple computation is done by using the sprig functions div and mul.

templates/includes/global_include.gojson
[
{{range .interfaces}}"{{.name}}",{{end}}
]

The global_include.gojson iterates over the interfaces list and prints in an array.

Note This json template does not create a valid json. The commas are not set correct. The document is not well formatted. Therefore it is easier to create the templates. To create a syntactically correct and well formatted document we use post processors. The syntax is corrected by removeTrailingCommas` post processor. The format is corrected by the prettyJSON post processor.

The next source block shows the expected outcome when applying the variables from above to the template.

templates/sample/example_result.json
{
  "description": "sample",
  "hostname": "static",
  "interfaces": {
    "ifp_0/0/1": {
      "1000/x*y": 666,
      "ip": "127.0.0.1"
    },
    "ifp_0/0/2": {
      "1000/x*y": 625,
      "ip": "127.0.0.2"
    }
  },
  "list": [
    "ifp_0/0/1",
    "ifp_0/0/2"
  ]
}

1.5. TestKit

In order to do a fast template prototyping we developed a test kit. The test kit allows to execute a template with a given variable set and validate the outcome against an expected result.

To execute we have to specify:

  • templatePath: Template main folder (default ".")

  • template: Template name

  • format: File format [txt, json, json5] (default "txt")

So for example if we execute template-engine-test -template sample -test example -format json inside the templates folder, this command will execute the sample template with the content of the example_variables.json file as input variables. After execution the outcome is stored in the example_got.json file, and validated against the example_result.json file. The format not only specifies the file endings, it also specifies how the validation is done. So for example the json format does not care about ordering of whitespace differences.


©Copyright 2021 RtBrick, Inc. All rights reserved. The information contained herein is subject to change without notice. The trademarks, logos and service marks ("Marks") displayed in this documentation are the property of RtBrick in the United States and other countries. Use of the Marks are subject to RtBrick’s Term of Use Policy, available at https://www.rtbrick.com/privacy. Use of marks belonging to other parties is for informational purposes only.